Back to Top

1
Hi, Guest!
  • General Lab
  • MIULAB Nitrogen Evaporator NK200-1B Visible
MIULAB Nitrogen Evaporator NK200-1B Visible

MIULAB Nitrogen Evaporator NK200-1B Visible

Update Terakhir 29 / 10 / 2024
Minimal Pembelian 1 Unit

Harga

CALL
Bagikan
DESKRIPSI PRODUK

Detail MIULAB Nitrogen Evaporator NK200-1B Visible

Product description: The nitrogen sample concentrator (visible) NK200-1B is mainly used for concentrating or preparing sample in batch. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation. It works by blowing nitrogen in the surface of sample which is being heated to accelerate evaporating and separating the solvent in the samples without oxygen. Instead of the rotary evaporation instrument, nitrogen sample concentrator can efficiently concentrate dozens of samples simultaneously. The sample surface in the tube can be observed while concentrating.

Feature
1. Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates

liquid evaporation and sample concentration.

2. The position of gas needle in air cavity can be adjusted to suit for different types of tubes.

3. The height of the air cavity can be adjusted. The length of a standard gas needle is 150mm.

4. Sample surface in the tube can be observed while concentrating.

5. Gas needle is controlled independently. Separately blow of each needle and flow regulating of each needle are

available to avoid gas waste.

6. The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.

7. Built in overheat protection, automatic fault detection and fault beep alarm devices.

8. LED display immediate temperature and diminishing time. Operation is simple and convenient.

Specifications

Model NK200-1B
Temp. Control Range R.T.+5℃ ~150℃
Temp. Setting Range 5℃ ~150℃
Temp. Stability@40~100℃ ≤±0.5
Temp. Stability@100~150℃ ≤±1℃
Block Temp. Uniformity@100℃ ≤±0.5
Block Temp. Uniformity@150℃ ≤±1
Temp. Display Accuracy 0.1
Heating Speed ≤30min (40℃ to 150℃)
Time Range 1min ~99h59min or continuous
Needle Plate Max. Lift Stroke 285mm
Gas-in Joint Outer Diameter Φ7mm
Nitrogen Pressure ≤0.1MPa
Nitrogen Flow Rate 0 ~10L/min
Needle Length 150mm
Sample Capacity 1 Standard Visible Block
Voltage AC 220V / AC 110V, 50/60Hz
Power 400W
Fuse Protector 250V, 3A/6A, Ф5×20
Dimension (WxDxH) 220 x 260 x 525mm
Net Weight 5.8kgs

alat uji keamanan pangan

Conventional configuration

Optional blocks from NK01 to NK07. Block can be interchanged easily.Optional flow regulating valve.

Cat# Spec Dia. of hole Hole bottom shape Block dimension
NK01 10 mm x 12 10.5 mm Round bottom 153.5 x 95.5 x 50 mm
NK02 12 mm x 12 12.5 mm Round bottom 153.5 x 95.5 x 50 mm
NK03 13 mm x 12 13.5 mm Round bottom 153.5 x 95.5 x 50 mm
NK04 15 mm x 12 15.5 mm Round bottom 153.5 x 95.5 x 50 mm
NK05 16 mm x 12 16.5 mm Round bottom 153.5 x 95.5 x 50 mm
NK06 19 mm x 12 19.5 mm Round bottom 153.5 x 95.5 x 50 mm
NK07 20 mm x 12 20.5 mm Round bottom 153.5 x 95.5 x 50 mm